Friday, 17 May 2013

To sea at last!

We have had a frantic three weeks in the yard since Lin arrived, so no time to update the blog. I am afraid this is a rather boring account of the work on the boat.
Andrew's last week was spent cleaning and polishing the hull until it was like a mirror, with breaks for swims in the pool and playing with his iphone in the library, with its internet connection. The engine came out on the Tuesday, with a lot of grunting, but the Turkish workers insisted that Turkish workers were strong and it came out cleanly. We couldn't get the fuel tank out though because the steering cables were in the way and we couldn't ask the crane to wait, so we finished cutting the tank in half, removed the steering cables and got it out without any trouble. 
On Wednesday Andrew and I went up to Sanai, the industrial district, to see the liferaft being tested. We got lost on the way to Sanai because of all the road construction. After wandering through the lanes we asked some construction workers working on a house the way to get there. One guy in a Manchester United shirt came over - it turned out that he had lived in Manchester for a few years - and phoned the liferaft company to find out where they were. He began to give us instruction s, but then decided it would be easier for him to drive us there, which he did. When we arrived, the liferaft guy put the liferaft on a table, pulled the cord and it exploded into life - it was enormous! An eight-man liferaft that looked as though it had room for 12. It had last been serviced in 2000 and the flares expired in 2001, but the liferaft man said it was an excellent liferaft in good condition so we gave the go-ahead for the service, and for repairs to the dinghy. They also sold us a second-hand canister for 22 euros in place of the grotty bag that it had been in.
Once the engine was out Simon got down to cleaning the engine room, which was thick with oil and grease, getting out the grimy greasy, oily old insulation and trying to track down all the wires and cables, many of which went nowhere and did nothing. Once he had removed the dud cables and identified the rest he tagged them so that we can make sure that the correct cables are attached to the new engine and will know what is what in future.
The old engine in the filthy engine room
On Thursday evening we went into Marmaris for Andrew and Sue and Steve's last evening. I had checked out a highly recommended Turkish restaurant and led everyone for miles through the backstreets only to find that it had not yet opened. Andrew took over and led us straight to the Taj Mahal for another Indian - it turned out that he knew the streets because he had sneaked off to get a tattoo done around there. We had a good meal and got a taxi back to the marina as we had missed the last dolmus.
Andrew left on Friday, after a lot of confusion over his transfer. A2b emailed on Wednesday to say that they would not pick up at the marina but we could have a taxi for some ridiculous price. The company handling it emailed half an hour later to say they would pick up at 10.45. I emailed them back to confirm that they would pick up from the marina and they emailed back to say no, they would pick up at Macdonald's in Marmaris, so Andrew got the dolmus to Marmaris, had breakfast in Macdonald's and got picked up on time.
Simon spent the weekend finishing cleaning out the engine compartment and cleaning and tidying before Lin arrived.
Lin arrived on her birthday, 22nd April, after a comfortable taxi transfer from Dalaman to beautiful sunny weather. Over the next two weeks we had clear blue skies and it got increasingly hot - too hot for working on the boat by the end of the two weeks. We had a birthday dinner in the marina restaurant that evening and got straight down to work the next day.
On Tuesday 23rd the gantry people came to install the new gantry, which took the next two days. They worked carefully and professionally and the new gantry is strong and even quite elegant, with a second set of davits, a crane for the outboard, four solar panels, fittings to pull up the passarelle, four sets of cleats and holders for boat hooks and fishing rods.
The new gantry

On Thursday 25th Erhan from Marlin came to install the new insulation in the engine room. He worked slowly and carefully over the next couple of days to do a really good job, giving us a clean engine compartment ready for the new engine. 
A clean engine room with new insulation
On Friday 26th the new fuel tank and holding tank arrived. We managed to get the fuel tank through the engine room and into place under our bed, but we did not want to install it until the engine was in, because the exhaust runs under the tank. We also got a carpenter to fix the wall panels in our bedroom, which had been removed to install the gantry.
The liferaft and dinghy came back at the end of the week, but the liferaft canister burst open and they had to take it back and fit new straps. Once we had the liferaft the gantry people could make a cradle for it to fit on the gantry, which they did at the beginning of the following week.
On Sunday 28th there was a boat jumble sale at the marina. It was scheduled to start at 9.30, but when Simon got there at 9.15 almost all the tables had gone. The punters were like locusts. Simon had taken two big bags, mostly of junk that we were giving away for nothing. People were grabbing stuff from the bags even before I could get them out and someone nicked the Adverc alternator regulator that costs £200 new, though they left the manual. In the end we sold or gave away everything we had come with, clearing about 50 euros for £500 worth of stuff. At the sale and barbecue we met Scott and Julie, who we had last seen at Aktio about 5 years ago.
On Monday 29th people came to fix our leaking forehatch and replace our crazed and slightly leaking side windows. They did a very clean job on the side windows, with the new windows making the saloon much lighter than it was.
Tuesday (30th April) was the big day, when the new engine was craned in, 



but nothing more happened immediately. Over the next week people were coming and going, measuring up this and that and occasionally attaching bits and pieces, but the actual installation had to wait until the new bearers had been made, to make sure that the engine was lined up exactly right. On Thursday someone came to fit the new exhaust, which is complicated because it is a three-inch exhaust replacing a two-inch exhaust so fitting it required quite a lot of manouvering and cutting of wider holes. It also turned out when they took out the prop shaft to fit the new coupling that it was non-standard, so we had to have a new prop shaft made.
On Friday May 3rd the surveyor came to do the first part of our insurance survey, which was all fine, and the hatch man came back with the new fore hatch, but when we tested it over the weekend it still leaked, so he came back on Monday and rebedded it, so we now have no leaks (touch a lot of wood). He also supplied and fitted a new mirror for our heads (bathroom). On Saturday 4th May the new prop shaft went in and it fitted very smoothly.
On Sunday 5th Simon went up the mast to try to fit the new masthead light and to drill out the old radar reflector brackets, which threatened to tear the genoa. He could not shift the screws on the masthead light and blunted two drill bits trying to drill out the brackets, so he decided to get someone in to do it. On Monday morning Mustafa from M2 Rigging came to give us a quote and immediately said that our rigging screws were cracked and the standing rigging was dangerous and should be replaced immediately, which he estimated would only cost 5000 euros. We called Jess, our surveyor, who immediately came to give an unbiased opinion and he reckoned that the rigging screws, and so all the rigging, should be replaced. Fortunately it can be done with the boat in the water while we are in England.
On Monday 6th Simon checked the sea cocks and found that both of the toilet outlet seacocks had seized.  Jess recommended Herman of Germany Yachting Services and he came immediately, freed one seacock and replaced the other. 
Her first two weeks had been very frustrating for Lin because, with work going on all over the boat and tools and parts all over the place she could not get on with her cleaning and sorting out – she could not even unpack her bag. However, it was not too disastrous because the weather was beautiful so she could swim and sit by the pool and read.
We were scheduled to launch on Wednesday May 8th, but we did not want to launch without the engine installation being completed, so we put it off till Thursday. Meanwhile Simon wired up the new solar panels and MPPT regulator while they continued to work on the engine. There was a problem getting the harness for the panel through the narrow channel, so they had to take the ceiling down to make a new hole. Launch time came and the electrician was still working on the installation of the panel. The tractor arrived and he finished off the panel while we were towed to the launching place.


Lin went back to fetch the bike


We were still not sure that we would actually launch – there was so little room in the marina that some people had waited two or three days beyond their launch date and some Australians waiting beside us had been waiting for eight days. However, our engineer spoke to the lift operators and asked them to launch us next so we could get the engine going. 

The engine started with the first touch of the button and we motored round to the outside pontoon – not ideal, but the weather was calm so it was OK.
There was still the high pressure pump for the watermaker to fit and some wiring to complete, which they did over the next few days. They also gave us fantastic LED strip lighting for the engine room.

Simon rigged up the new gantry, now with the liferaft cradle.


The new bimini came on Sunday, but they still had to make a template for the side pieces and had put the leather patches in the wrong place, so we did not get it until Monday evening.


Simon went in to Marmaris on Tuesday 14th morning to buy some plumbing bits and pieces for the watermaker and we had our last lunch in the Marina restaurant – we are such creatures of habit that the waiter knew what we wanted without our having to order – two beers, one fish soup and two cheeseburgers, all of which are excellent. After lunch Lin collected the laundry and we could leave.
We set off at 2.30 and motored over to Netsel marina in Marmaris to fill up with diesel (in the rain, so we put an umbrella over the filler to keep the water out. We have to try to get 50 hours of motoring in so they can check the engine while we are at home. After getting fuel, we drove round to Ecincik, where we arrived about 7 pm and anchored for the night.
On Wednesday 15th we motored to Fethiye. On the way our heads (toilet) jammed and we could not pump out. Simon spent most of the journey on his knees, dismantling the loo and replacing all the serviceable parts, but could not find any blockage in the accessible places. We arrived in Fethiye and  checked in to the marina soon after lunch. We met up with John and Elsa, also on a Moody 422, whom we had last met in the Ionian five years ago. We passed on to them all the spares for our old engine.  They have a very good deal, working as flotilla leaders for a local charter company they get all their marina fees paid and their diesel and all the work that needs to be done on the boat is paid for too. They seem to enjoy leading flotillas around the same routes week in and week out.
New rich Turks dodge tax by registering their boats in Delaware. But a lot of them cannot spell their port of registry.

One motor boat was registered closer to home (sorry lost the Lea!)


On Thursday morning we walked around Fethiye and went up to the rock tombs in the cliffs above the town.



with a good view over Fethiye.

On the path we disturbed a tortoise.

On the way down we passed the Lycian cemetery, tombs being all that remain of the ancient city.
One corpse made its mark by parking in the middle of the road.

We went on to the wonderful fruit and fish markets to stock up. 


John and Elsa came to look round our boat to get ideas and we looked round theirs, which gave us more envy than inspiration because John is a craftsman who has done things that we could never do.
After lunch we motored over to Pilloried Bay, to pick up a mooring. We were here exactly two years ago to the day, but then there were only a couple of boats 
Pilloried Cove May 2011
while today it is packed – with only a couple of free moorings which filled soon after we arrived.

 Simon went swimming to try to clear the toilet from outside, with a Dynarod pipe cleaner. He bashed away for ages and loads of limescale came out, but still the loo was blocked so he will have to have another go tomorrow. 
This morning, Friday 17th, we set off at 7.30 to motor back across Marmaris Bay to Bozuk Buku, a seven-hour drive.

1 comment:

  1. Phew! That sounds like a busy few weeks. Be nice to get on with a bit of sailing.

    ReplyDelete

Note: only a member of this blog may post a comment.